intake

Hi I am looking for the part numbers for the items shown in red below (the plastic parts) Can anyone help or does anyone have any second hand ones for sale? thanks

So spent an hour taking to standard intake out and installing the SL55 bigger intake to my '32! Couple of bits were a struggle but it's in there pretty solid so overall nice lil upgrade! Only problem is I can't drive at the moment due to a foot opp!!

Hi has anyone updated there air intake system? if so was there much improvement? i.e. figures state around 20 BHP increase and besides the power increase, they look nice!.. I cant seem to find any here in UK but appears to a few in USA and prices seem acceptable but gather with import taxes...

Problem, car was in limp mode for a couple of days and finally got it into garage, fault is intake manifold flaps jammed. Looked at the bar and noticed that 2 of the cylinders had the bar disconnected, tried resetting the fault code but came back instantly so had to remove actuator bar to allow...

Well, Yesterday I dismounted my manifold to open it and clean it up. Before starting I decided to check the procedure at the forum. I found helpful stuff, but what I didn't found was if I had to put again glue in top of the "ribs" that assemble with the upper part. My engine.. M112 or M113 is...

I have a 6L V12 - m120.980. I want to join the two intake manifold inlets into one, so that I have one tb one iac one maf one map. Will this disturb the airflow? I'm thinking of either having the tb on top of the engine or maybe on the back of it - two hoses wrapped around and joined...

I have tried to Google the part number for the 'Y' pipe (air inlet) that is fitted to the OM 642 V6 diesel engine in my car. (and turned-up a blank) It has been over-tightened by someone in the past,and the plastic has cracked, and therefore oil can leak from it directly onto the inlet port...

Hi Guys, had a few questions about the above. Done a bit of reading on this by searching the forum so know that the Y-piece at TB end is a lot bigger than C32 one but not too clear about all the piping (from radiator to air-boxes to Y-Piece). Is the SL55 piping also larger in diameter? I read...

Hi all, I'm after an air intake for an SL or similar 55 AMG I have a C32 and am looking to upgrade the intake to release some horses. Thanks in advance Steve

I am converting a08 E200kompressor to LPG. What is the best way to access the intake manifold?

Hi Just purchased a 320 cdi 2006 already just serviced, but trusting no one i had the car serviced and checked over by a new garage i have not used before, when i picked it up he told me it needed a new intake port shut off motor, ball socket, intake pipe socket, also replace upstream 02 sensor...

Hello there , me again lol Right jerry told me to get some sl55 air intakes for my c32 . I have hunted some down and I need to know if I need the part that goes into the throttle body as the bloke hasn't got it . So will the air boxes be good enough with the relevant piping as the upgrade or do...

Missed one on eBay recently :(

Working on my C240T and M112 engine changing valve cover gaskets, plugs and other items before the winter arrives as my C240T is my winter work horse. To remove the valve covers on the passenger side (LHD) I had to remove the MAF and intake pipe. I saw a rectangular canister which plugs into the...

I'm after air intake parts for my 2002 C32 AMG. I need air cleaners left & right, Hose left & right, Air intake pipe & Cover plate. Does anyone know a UK supplier of used parts or new parts at a reasonable price?

Hi, As per title would like to install the system onto my E430. Thanks

I normally tend to keep an eye on my engine and over the last few weeks have noticed a general build up of dirt around the turbo and one morning there was a minor 'incident' where the car juddered for a moment under acceleration. I've finally got around to cleaning up the engine this...

Hello, so basically the previous owner fitted an LPG system to my 1982 280ce, it doesn't work very well so i've taken it all of. the LPG mixer it was fitted under here...with silicone (by the previous owner i must add) should there be a rubber seal in the indent on the bottom...

I am trying to source a pair of secondhand V6 W211 E320 CDI intake manifolds. Does anyone know of any please? I am aware of the usual recommended breakers. Splitpin

Hi Gents, Would appreciate some advice here, if anyone has had the same issue. My car has been stuck in limp mode with the engine management light, after having it diagnosed, the error came as the intake manifold runner sensor. They dont know weather it is the motors or the whole manifold...