maf

Hi folks, I'll give you the full background. The original Bosch MAF had went in my car, i replaced it with a cheap one, which was absolutely useless (£30 and faulty). I went then and bought a proper Bosch unit from Bosch and installed it - car is accelerating like a dream and throwing me into...

hello there fellow members.i have a 55 plate clk 270 cdi with 90k on the clock.i have never taken off the maf sensor to clean it.will it be a due a clean or is it something you dont do unless theres a problem ?

Hi As per title really. Need a replacement loom from MAF to ECU,obviously chopped,from a breaker. Please call me on 07568 073024 or PM here if you have one. TIA Steve

Hi! Yup,I've rewired my MAF and she's been running miles better. Sadly,I've been silly enough to use the same colour wires when doing the job,taking each piece one by one.A bastid to troubleshoot. So,could anyone tell me which colour wires go to each of the pin numbers on the round socket at...

Hi all W210 e280 Maf problem ?? My 2001 e280 which is dual fuel is giving constant fault codes, I have been told that the post cats have been removed 02 sensors replaced and plugs changed the errors that show up are below I cannot detect a misfire when driving ,the car will run very erratic...

So I've been having issues...and a lot of people have said could be my MAF...just been to look at it.. And low and behold there's the top clip missing has one underneath...so its not fitting tight and moves around a little... I'm hoping this explains the high revs...not finding gear at times...

Ok all my last stab at this, I appreciate all the help so far, and I'm new so I've been 'wittering' about this...anyway...here we go...I'll try explain better 1999 w208 320 clk auto ABS ASC lights on ...but now and again go off. D light doesn't always stay in sometimes flickers Start...

I have tried searching but can't find what pins to put a multi meter to and if to have the engine at idle or being revved. Reason I ask is my car still has a slight mis on acceleration but I haven't the funds to get the codes read. I asked local garage and he mentioned that I have a bit of grey...

Hello all, Having probs - Engine running rich bank 1. Before - Engine running lean bank 1. This problem I found the PCV hose under the airbox perished. Changed it then engine running rich. Unplugged MAF and drove only fault was showing that the MAF low circuit. My understanding faulty...

Hi guys, How many maf's does a C32 have and where are they please? Also, are there any online resources to merc parts diagrams and instructions to changing hardware? I.e. for BMW there's realoem.com for diagrams and parts and spagetticoder.com for removal/installation of parts. Thanks Kash

Hi Guys, im having a slight issue with my clk 3.2 - When I accelerate it feels like i've lost power and the revs are restricted. If I floor it, it stutters and seems to cut out and not go past 4000 rpm. Today I thought I'd unplug the cable to the MAF after reading some similar issues on...

I've had the EML on my 430 since I discovered it after replacing a cluster bulb. Replaced one o2 sensor and the light went out. Two weeks later, the light was back on. Had a STAR diagnosis of blocked catalytic converter. I then had a Terraclean and hoped that might get rid of the problem...

Hi will a c43 maf work on a w210 E55 are they the same some company's say they are some say not Any one know

About 4 weeks ago the engine light came on in my car. The bluetooth ODB reported a P0102 code which is MAF low input. It seemed to have no affect on the car but I bought a new MAF anyway. The new MAF didn't fix the fault and I then noticed I had lost kickdown, which I don't really use much so...

Car went into Limp Mode again recently and the symptoms appeared to be identical to the last time it went into LImp Mode ( no kickdown and no revs in neutral above 3000RPM ) so I debated to go and have the codes read for about £50 or to lash out £60 quid for a new MAF I decided to change...

hi all, i have a 1999 230k, i recently had to deal with the lower breather blockage problem, i had no issues doing the fix thnks to this fourm and have had no oil in my air filter since. i aslso cleaned out the air box and all of the pipe work with carb cleaner, a few weeks after i started...

1. My MAF sensor is on its way out, cleaned it, worked well for two days now playing up again. - Do I buy a Bosch one? £165? - Do I buy an OEM eBay job? Any experiences with either? 2. Does my 1998 W202 C200 2.0l need a damper On the tensioner??? Please help!!!

got engine light come up yesterday, when checked codes it had p0102 which points to maf, when i opened the engine bay i saw that one of the wires to the large plug on maf broken, it is right at the plug so no way to solder it, does anyone know part number to replace cable, it looks a big job as...

Hi everyone, I just wanted to say that it is all too easy to think that there is a fault with your maf sensor when it's a much more simple answer like a lambda sensor. I can't recommend getting a good auto technician to check out your vehicle first. It may cost a small amount but it could save...

Hi guys, Local auto factors has a special on certain Bosch Mafs this week, and they have advised me that F00C 2G2 025 is the correct part number for my car? Does anyone know if this is definitly correct, because when I check online this does not look to be correct part no. Other part...