torque

I know this topic has been discussed before,but never fully explained,but can someone tell me how to totally empty the torque converter of fluid,when doing an auto fluid change. I have seen references to forcing it out,although I am not at all sure what this means. John

I wondered if some kind member could let me have the torque settings for the cylinder head bolts and also camshaft cradle bolts for a C200 M271 engine. Thanks in advance.

Tractive effort 27,275 lbf (121,330 N) :D

I bought ELM327 adapter and tried it with Torque on my Android tab. While it connected OK and shows real-time info on the dials it doesnt show any fault codes. I have SRS light on and windscreen washing liquid message but nothing in the Torque. It says no fault codes stored in ECU. I need...

hi im looking for a c36 w202 preface lift torque settings for when the engine is hot or cold i have a oil leak where the alternator is front left of engine as you look at it its the same place the c180s do this its just anoying and i want to do it any help would be great...

I have noticed on a couple of times under load and when cold in a high gear low speed the car seems to kangaroo (very smoothly & just noticeable) if that makes sence.. any ideas? :confused: TIA

For those of you of a mathematical bent; I have often wondered why my car is as fast as it is and why it uses fuel as it does. Let's see if anyone else can do the maths and then better still explain why!? My engine is a 1.8 kompressor M271 204046 143bhp in standard spec... you can research the...

dealer said 140NM. Sounds high to me. Used to either 110-120NM. Just thought I would check with those who know.

Hi all newbie here, was wondering what torque the fastners for lower arms and front anti roll bar were ? Any help much appreciated

Hi all, Does anyone know what this is? I recently replaced this / greased it but realised after the event I forgot to look up the correct torque before starting! Now getting a slight creaking from it when turning the wheels at low speed and wondering if I've over-torqued it... Any help...

I am replacing the guides,valve seals ,water pump The torque settings for the head ?? is there any threads in relation to this also is there a disc eq15 i think that covers all parts and service issues if there is where can you get it???? its an MB DISC but apparently there are out...

Want to do auto oil change on A160 cdi auto box but dont understand how the oil is drained from torque conv, the WIS says, connect breather pipe (Pt No 722 589 00 90 00) to hand pump and slide the breather pipe into torque conv. But exactly where does the pipe go maybe into drain screw hole can...

Hello, Anyone as the torque value for the 16 bolts that hold the manifold into the head on the E300TD 1997? Thank you. Olivier

we are an independent in belfast fri 24th we got in one of the many water in torque converter due to faulty radiator we took of the front bumper took of the gearbox hoses and fitted its own gearbox oil cooler it fitted lovely on the aluminion bumper support had new hoses made at the hydrulic...

In an effort to eradicate the high pitched whining from the engine, I'll be replacing the water pump on my 2001 Sprinter 313CDI (OM611) this weekend. I have the pump and gasket but would be grateful if someone could let me know the correct torque settings. I would guess at not too tight, say...

Just found out the torque settings for the bolts holding the rear mounting wall in my W208, which creaks from time to time. Strange question but how tight in Nm 9? Is it very tight?

Hi guys & girls, Silly question but ive got a sneaking suspicion that my torque convertor is causing my w208 E240 2.6 V6 estate gearbox to slip, can the bands inside be tightened to stop this or do we have to look into having it changed? Thanks in advance for your help and suggestions...

I'm looking for a reasonable quality torque wrench for occasional use i.e. mounting alloys. I believe these should be torqued to 110Nm?

Hi guys, Chance to see just how fast your car really is, 1 mile timed drag race! Enjoy going as fast as you like with out getting arrested! :D Myself and another E55 are already booked, along with two M cars. Here is the link. Home 2010 Paul

Hi, I've just bought myself the above car and i'm after some technical data if anybody on here is able to help me out? I need the cylinder head torque settings and a timing chain diagram please. Many thanks, Carl.