torque

Hi All, As per title really, is there a way of knowing if my gearbox has the torque converter drain plug? Or will i only find out when i take the sump pan off? It's a 5spd 722.6 box on a 1998 C240 sport. Thanks in advance!

Good morning all My C220 CDi 56 plate went in to the main dealers for a second attempt at getting the auto box behaving after they had changed the oil - running perfect now - shame it took so many visits. As usual, they did a health check and told me the NS torque strut rubber boot has a split...

hi, can anybody tell me the correct torque setting for spark plugs on a clk 55 amg 209. thanks. :cool:

Hi there, i am looking at getting either a w124 or w201 as they seem to last quite well in nz. I think the mid 70's mercs used a fluid flywheel in place of a torque converter and pulled away in second as first was too low except on hills or for towing. Do the latter versions use a fluid flywheel...

Hi looked all over google and could not find them, can anyone help with torque settings for front lower control arm, lower ball joint, upper ball joint nut, and also the front and rear brake caliper bolt torque settings please:confused: thanks.

I am currently changing my front discs and pads in my S211 Sport Estate. Can anyone help with the torque setting for the 2 bolts that hold the calipers on. Thanks

Hi I HAVE A E240 W210 1998 HEAD GASKET BLOWN .WHAT I WOULD LIKE TO KNOW THE TORQUE SETTINGS FOR THE HEAD BOLTS PLEASE THANK'S

I HAVE A 240 E W210 1998 HEAD GASKET BLOWN .I HAVE GOT THE NEW ONE'S AND BOLTS BUT I DON'T KNOW THE TORQUE SETTINGS?AND I CAN'T FINED THEM ON THE NET ANYWHERE:wallbash: .SO I WOULD BE GREAT FULL IF YOU COULD HELP ME OR ANY MEMBER WHO MY HAVE THEM COULD PASS THEM ON THANKS.

Hello I am renewing the oil pan, seal and filter on my w124 E220- 1995 Auto Box. Can anyone tell me the settings to torque down the bolts as I have heard that over - tightening can warp the pan and cause leaks. Is my understanding correct? regards Paul

Hi there E300td(w210) om606 turbo Does anybody know the torque settings for the injectors Many thanks EMH

I've never owned a torque wrench, time for me to buy one. Mainly for use on wheel nuts and maintenance on the MX5. What forces do I need to cover for general car work? What can the collective recommend please?

Whats involved and is it as good as new?

I'd like to buy an OBD unit with Bluetooth so I can run the Torque app on my Galaxy Tab. There are so many out there to buy, I was wondering if anybody has successfully done this already. If so, which OBD unit do you use? Thanks in advance.

Hello So today was my first proper little drive of my car having taken the large and wide current tyres off and putting on the original small (16") alloys and winter tyres. The tyres are Conitinental WinterConti 225/55/16 Today it was damp and at a dual carrageway set of lights I gave...

Anybody know the max torque and at what revs of the OM606-962 turbo diesel engine. As fitted to the W210 300TD. :thumb:

hey folks.. thinking out loud here.. back to my previous thread about the slight rattly noise from under the car, I was talking to my MOT guy today and he suggested the rattle could be from the torque convertor.. some one on here suggested it might be tappet buckets or something like that...

:eek:Ive been getting a vibration/irratic gear changes and a rev counter that doesnt want to stay constantan-keeps flicking up and down 500rpm even when the throttle pedal is still. Just been to my local indi and i am booked in with him to have it hooked up to star and see whats going on. He...

Is this Mounts or Torque Converter? I Have a Vibration in reverse, In drive it's fine, but neutral is getting quite loud, also when turning right I get a vibration while turning, should I replace mounts?

Need some help here please just been replacing my rear disks and pads on the e55, fairly straightforward, just a pig to get off the handbrake shoes. my question is,how do you guys tighten the caliperbolts to 180 nm when the car is on a jack? my torque wrench is massive and just cant get...

Hi Can anybody tell me the correct torque settings for mounting the w126 front brake discs onto the carriers? If it makes a difference, my car is a 1986 500SEL with the 300mm discs. Many thanks John