wheel

As per title really - anyone recommend a good wheel repair place in the WR11 area? Scuffed a diamond cut rim and trying to decide whether to let the insurance have it or get it done locally and claim back. Having seen the pictures, they don't consider it a candidate for in-situ repair. Makes...

Hi, picking up a CLA tomorrow but it has no spare wheel, we're can I find out what's the correct one for car and I'm assuming I'm going to need a Jack etc? Sent from my iPhone using Tapatalk

As above, What is the correct size and Offset of wheel fitted originally to a w211 e55k?

Hi guys I have standard oem 18' Mercedes alloys and I have just fitted 15mm spacers at the rear and I need a bit of a confidence boost on the length of the bolts I have used. The originals have 27 mm of thread and engage with 6.5 turns. I have bought new 40mm bolts which engage very...

How many owners suffer from the same issues? I've had my car aligned various times on 4 wheel geometry machines. Some attempts successful and others not so. I know this issue has been covered but I'd like hear from other owners? My cars was recently aligned on a 4 wheel John bean machine and...

C Class 200 Sport 2017 Anyone know how tight to do the wheel bolts up please?

Hello all.i want to replace the steering wheel oil because when the engine warms the steering wheel become hard. What oil do I need and how to replace it???

Hey guys, My front wheels are wearing un-evenly, have been told I need alignment done... Having the front tyres replaced, but not sure where to have it done, Kwik-fit seem to be fine swapping tyres over but they are s*** at anything else... I really really don't want them messing around...

Hello Just swapped my C Class for and E Class and managed to curb one of the new E Class wheels. As mine does not have a spare I am looking at either a refurb or buy new. Merc have quote £264 for a new one but will not give me the part number, so I can shop around, can anyone help if I...

Yesterday I noticed a very small puddle behind my driver side rear wheel. I stuck my head under and never seen anything obvious, it was a bit dark so couldn’t get a good idea if anything was wet under the car. At this point I decided that it might have been from another car which was parked on...

Guys My 124 300te 4Matic. I replaced all four corners with New discs & pads. Also had two new ARB - Clamps and bushes fitted. No dramas there. Went to test drive yesterday and... I have a loud clonk that matches wheel speed and can be felt through the pedal coming from (I think) the front...

I'm after an OE steering wheel for a 190E/124/etc era Merc which is a bit smaller than the original - so from a Cosworth or Sportline. Condition isn't crucial as I don't mind colouring or trimming. If anyone spots one please let me know. Cheers!

Hi I thought twice re buying a car without a spare wheel of any type but did by a brand new gle last year. Last week, tyre warning light on, screw in tyre, (cars only done 4k) and thankfully in the middle of the tyre so can be repaired - went to National Tyres, nearest to home - got the tyre...

I am selling a genuine 19 inch rear AMG alloy wheel from my CLS 63 AMG with two Pirelli tyres. The car was serviced three weeks ago and I was informed that the tyres have 4mm thread left. The wheels were aligned by WIM in Chesham. The wear is even across the tyres. The reason for the sale is...

Hi All, we have recently bought a W203 55 plate 2.1 C200Sport .. last week the front lower arms had to be replaced and now we are being told ball joints need fixing as there is some movement... how much is this going to cost? The arms cost £186 Many thanks in advance

im after a single (or maybe a set) oz amg 3 piece front 8.5x17 et18 alloy wheel, usually found on 129's and 126's. thanks

....after a 1995 (pre facelift airbag) black leather and walnut steering wheel for an SL. Hen's teeth i know but worth a shot!

I changed both front wheel bearings yesterday with genuine MB parts. I tightened then up as per the videos on YT but the NS wheel has a very slight rock when worked with the hands at 3 and 9 o'clock. It's fine at 6 and 12. I've already popped the dust cap off and retentioned the bearing by...

Hi everyone I'm scratching my head a bit whilst installing a Pioneer Appradio (so I can use Apple Carplay) in a 2003 SL500. The original radio is (I think) an Audio 30. There looks to be D2B fibre optic in there but the radio had two standard ISO connectors so after wiring up the...

Anyone know any good products to remove the old sticky pads wheel weights were on? They are a pain to get off :( Thanks