16" Alloys hub question

[KillerHERTZ]

Im currently flogging my old 16" W202 Sport alloys on eBay, ive been asked if I can measure the centre hub to see if they will fit a Campervan.

As its dark and wet, would anyone know already?

These are them:

 

[Will]

If you mean the 'centre bore', IIRC it's about 60mm.

I'll try and check for you.

Will

 

[Will]

Just googled and found this website:

Mercedes alloys | Alloy Wheels Direct Ltd

Seems as though all MB wheels have a centre bore of 66.5mm and a 12x112 PCD.

HTH,

Will

 

[KillerHERTZ]

If you mean the 'centre bore', IIRC it's about 60mm.

I'll try and check for you.

Will

Thanks,

I guess so, the message simple said "can you measure the hub as I would like them for my campervan"

I have no idea about offsets etc, what else would he need to know?

 

[Dieselman]

The hub hole should be 66.6mm and the offset will be 35-42mm, but you need to check the wheel itself for that.

Depending on the campervan, assuming it's a VW, the centre will be 57mm for T1,T4 or 68mm for T2,T3.

 

[Will]

Wheel diameter (16")
Rim width, inches (xJ)
Offset (ETxx)
Centre bore - as above
PCD - as above

Erm - that's about it I guess.

Will

 

[EDZ649]

Just googled and found this website:

Mercedes alloys | Alloy Wheels Direct Ltd

Seems as though all MB wheels have a centre bore of 66.5mm and a 12x112 PCD.

HTH,

Will

Think it's 5 x 112 PCD, never seen a 12 stud on a merc unless it was a truck

 

[lynall]

They only have ten, i think he meant stud diameter?



Lynall

 

[Will]

Yep it was late..

5x112 PCD, M12 bolts

At least you were paying attention

Will