Hi All,
Not sure where to ask this so sticking it here;
I'm planning to get a tow bar fitted so I can take the family's bikes out on day trips/holidays/etc.
I was originally wanting to get a discrete/removable one but on reflection would settle for a permanent one - the priority is function...
Hi all.
I need to remove the rear pop up roll bars from my 03 w209 cab.
Seats are out and looking at a sea of metal and hex nuts...not sure how to proceed with caution.
Anyone have a copy of the relevant WIS page(s)....or some sagely advice.
I am fairly sure this must be a rare DIY job...
Im about to embark on changing my front upper control arms on my 500SEC which can potentially lead to snapped anti-roll bar end as pictured below.
As a preventitive measure Im getting some repair ends machined similar to the kits available on ebay
New Mercedes Benz W123 126 Sway Torsion...
Guys
2001 W203
Cant find anything on this so here goes - I have a noise that seems to come from the power steering. When I turn left or right, stationary or on the go there's a noise that gets worse when its colder outside.
Makes a whirring noise. whirr left and whirr right (sorry, no idea...
I have to fit a towbar to the ML (W164) and I see I can either use a universal fitting kit for the electrics or a vehicle specific one. My local towbar fitter does not think the vehicle specific one is worth the money. He says he has been using the universal kits for some time and has never had...
Hi,
I am about to clay bar my car, however, I only have about third of the lubricating liquid in the bottle, can I add a little water to this so that I
have enough to carry out the work.
Many thanks
Terry
I've just ordered my ML350 (and now waiting patiently until 1st March whilst it's being built!) and one of the extras I needed was a factory fitted tow bar and 13 pins electrics. I have a question that the dealer could not answer - Is the tow bar compatible with the Alko hitch on the caravan? I...
Hello ,
My anti roll / sway bar is knocking after putting new rubbers on .
I have noticed that they metal bit under the bushes had worn , I added a bit of tape inside the bushes to make it a big tighter fit and it was ok for 2 weeks but now knocking again .
Any ideas on what I can do without...
just taken this off my car as it wont fit with my c43 bumpers..lol
anyone wants this for a small donation and postage costs please give me a shout on
07534282308
glenn
One for the Techs. Can a bar for a late model car be used to set toe on a 124. Are all the MB toe-press bars giving the same load more or less, or are they a little different?
I could imagine the stiffer bushes in a C63 may need more of a push than a 124's, but then again the force that the...
Guys,
I intend to sand my 202 with 2000 & 3000 w&d. What I would like to know is it better to clay bar prior to sanding or sand first, then clay?
Cheers in advance.
best clay bar? / Clay kits / advice please :)
Hello Guys,
Ive just got a used CLC in Tenorite Grey.
The paintwork has a few stone chips, small scratches etc.. so I'm gonna get them taken care of (prob use 'Chips Away'-Are they any good??).
Anyway, once I have had the chips taken care of...
was wondering would a c43 anti roll bar fit on a standard w202 c250 of the same year. been told its a thicker anti roll bar so would it be an upgrade from the original. also is it the same on the c36 and sports versions...!!
cheers
Hi All
I am new to this forum and a new Mercedes owner. I have a CLK 320 CAB 2005
Unfortunately I already have a problem.
I went over a speed bump a little too fast and the rear head rests (I presume these are the roll over bars as well) popped up also the hazard light came on.
I have read...
The AMG Performance Studio now offers a roll bar and a carbon rear wall for the C63 AMG Coupé Black Series. For drivers who appreciate motorsports this is absolutely worth considering - a customization which is installed within 5 days in Affalterbach.
For 7,021 euros, it is now possible to have...
Hi All , seen several people mention this mod for the vito, but cannot find out exactly what it is and whats needed. I realise its a suspension part from the viano thats not standard fitment to the vito but would like to know what it is and whats involved in fitting it .
Any help appreciated...
Help!!
I have the squeak of death (as in i'm gonna kill myself if I cant fix it!!!) coming from the rear of the car.
Took it into my local suspension place who worked out it was the drivers side rear anti roll bar bush. A liberal application of grease silenced it for a few days but it came...