manifold

how the heck do you get this off, the 15 or so hex bolts to the block come out easy, but i cannot see how to detatch it from the pipework? is there a particular area i should be looking for, or is it just a case of work blind?

Needed to fit a w208 clk 230kompressor Thanks!

As title, have had a blowing sound from the front section of my exhaust for a little while and today it was confirmed the manifold is cracked. Car is a w208 clk 230k I was really hoping it was the rear of the exhaust so I could just get a nice cat-back system What are my options for getting...

As it states really. I think that I may need an exhaust manifold for my 51 plate clk 200 kompressor. I have no idea how much they go for, but eBay doesn't have any today and I thought that I would test the water? Cheers Shane

I have a slightly cracked manifold and am wondering if I should try to get this welded or look for a second hand one... If so, any ideas as to where would be welcome.

Mercedes W201 190e 2.3 2.5-16 Evo Cosworth TURBO Exhaust Manifold Mosselman AMG | eBay Looks basically like my mosselman manifold and not to bad quality i asked for more pictures and it looked good quality.. May be helpful to someone

eBay - The UK's Online Marketplace He`s got them at £135 buy now,very cheap compared to say CKS

On the plastic top of the exhaust manifold (facing car, left hand side) there is a knob. I could not find it in the manual. What does it do? :dk:

After using one of the those fuel injector cleaners redex i started to develop misfires and dog running. I've got the misfires on my sl60 after about 5mins of it being warmed up. Then it was running like a dog. felt like fueling problems and i thought might be all the gunge being unblocked from...

Hi all, just collected the car from the stealers after having a new inlet manifold fitted and for those of you interested the cost was £1194.96 incl vat. However this does also include £18.70 + vat for a short test to find the source of the problem? and also £88 + vat for an engine check to find...

Hello This is my first post, and I feel I must point out that I am not mechanically minded. The MOTs on my SLK230 have reported corrosion on the exhaust manifold for several years (I have had the car since 2001) but nothing that required action. A couple of months ago my car had an...

Morning all, as per the very useful post in this section I cleaned my EGR valve yesterday and was surprised at the amount of soot & clag in it. Trying it since I have not had the increase in performance that others have reported but then realised that I also no longer hear the turbo whine that I...

Hi guys Are there any strange hex bolts or anything I should know about before removing my inlet manifold ? Going to replace the lower breather system as everyone and his dog has told me to :) Cheers Chris

need the part in the picture it,s a tee section that bolts in to a pipe that comes out of the front of the manifold and runs to the back of the engine the round bit with the small rubber hose has come off and the engine is now running lumpy. it fits into the pipe like a tee section you use in...

Hi, They are starting to make a bit of a noise. Anyone have any good condition ones? Or the best place to get em from :) cheers bart

Hi is it worth buying a new Bosch manifold sensor for a spare? I see a few advertised for mega bucks and although my 280sl m110 engine does not need one, if you had the option of one for say £250-300 would you buy it anyway? Regards Rich

a few picture of the crack that was causing the noise on a c240 v6 sport w202

wanted m112 v6 c240 v6 drivers side manifold contact me in pm thx

i fitted new cats to my w202 MB ones i tought i had a blow under or near drivers side pedals i said i would look at the engine bay so i striped out all plastic parts air box maf intake pipe and so on i saw a little oil near rocker so i nipped the bolts a little i looked at the metal...

hi i'm about to attempt removing the inlet manifold on my c250td, full of oil and when on boot its blowing past one of the o-rings . picked up some new rings from the dealers - i asked for 5 - they said i need 10. are there any watch outs on manifold removal , other than dont drop anything...