manifold

i decided to clean out the throttle body today and found alot of sticky oil in the inlet manifold! anyone cleaned one without removing the manifold? or just leave it alone?

hi all. i am changing me exhaust manifold gasket and "now" also my turbo to exhaust gasket. i put a post in a few months ago asking why it was whistling ? got so fed up with trying all sorts of things i got the ump and stripped it down. anyway it was blowing on the front one and also turbo...

Hello all, Does anyone know how long it should take to have the inlet manifold and associated stepper motor replaced on a 2001 w203 c270cdi? The reason I ask is that after my car had gone into limp mode I had it diagnosed by the local mercedes independent as the stepper motor had stripped the...

how does the manifold on the 320 come off want to clean it

Done a bit of work on a friends 320TE (has all the amg kit, looks lovely!) Noticed it had EFI rather than the K-Jet crap. Which got me thinking, I'd love to convert my TT setup to EFI and proper management. Would the inlet manifold from a 320 fit on a 300-24v? Would make life easier.

Hi all bit of brain picking if I may 2000 V6 petrol E240 - fault codes showing are P2064 and P2004. I think the 2004 is 'intake manifold runner stuck open' and 2064 is 'reductant supply control circuit high'. Firstly does anybody know if these codes are right - all the charts seem to suggest...

Hi to you all. I have had a small fuel leak, so yesterday I changed the fuel shut off o'ring on the fuel pump. I did it about 15 months ago and recently i noticed a smell of Diesel. Anyway the old one had a small nick in it and I have used it and not noticed any more leaks touch wood so far...

Hi All, Can anyone tell me what is connected to the inlet manifold as i have to remove it. Is there a flex hose, will i need new parts if i remove it. I have had a quick look and cannot make out what is connected to it and how to reove what is connected to it. I ask as i am sure someone will...

Hi, Does anyone have any suggestions / companys for a tubular exhaust manifold to do away with the original cast iron job. So far my searches have come up with an ebay company selling them for £699 which seems rather pricey!!! Regards

Hi all, I am starting to hate my E220 CDI - w211. Seriously thinking of getting rid of it. Anyway, I was travelling and suddenly the car went into limp home mode. I re-started and the car was fine for a few miles - limp home again. Got the codes checked and its the inlet port shutoff motor. Do I...

WORKSHOP INFORMATION SYSTEM INFO REQUIRED Hi guys i am looking for the w i s (WORKSHOP INFORMATION SYSTEM) document pdf files for removing and replacing the inlet manifold on my e220 cdi, doc ref are AR09.41-P-1310HC AND AR09.41-P-1310HD. If anyone can help i would really appreciate it thanks guys

Hi guys, i am looking for any pdf files with regards to changing an inlet manifold in my e220 cdi, 2000 model. It needs replacing and was want to do it myself. Also anyone know how long it will take or anything in particular to watch out for? Thanks for your help. regards

The linkages for some time on my year 2000 E220 cdi have been problamatic, ie loose ball joint fittings that operate the internal flaps that connect to the metal linkage, to the point that they keep falling out of their sockets. Have seen a complete inlet manifold from a 55 reg C220 cdi on ebay...

Well got in the car on sunday after 6 months winter hibernation and heard a farting sound when booting it... i replaced the complete exhaust 4 years ago so not that... open the bonnet and hear the noise loud and clear.. could see it was the EGR valve but at first didnt notice it was...

I'm thinking of getting one of these performance headers: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280221903921&fromMakeTrack=true&ssPageName=VIP:Watchlink:middle:us Its cheap yes, but it'll do the trick... and anyway, the c230k manifolds tend to fail round the 100k mark...

hi guys inquiring advice again would a 190e 2.3 16v manifold fit a w124 230 engine a quick thankyou to every body that has given help and advice over the last few months

hi i have a clk 230 w208. i have had 2 manifolds in 2 years both have cracked any ideas would be a big big help. i dont want to have to buy another one cheers

Anyone know if the exhaust manifold on 1999 clk 230 k auto coupe goes down or up when removed from car. Undone everything but can't get it to worm it's way out! Got a nice race header to go in, and built a system from stainless. Everything is stripped right back but there doesn't seem...

When the engine is under load on my 2001 C-Class 200K it sounds from outside the car that the exhaust is blowing at the manifold. It is not a blowing soundbut a sort of sitting noise. I have had this checked out and told there is nothing wrong with the exhaust and the noise is normal for these...

this is for a 1994 W124 E300d Multivalve OM606 engine started to do a full write up but was too long and would add nothing to what you can already find. Insted i will post up the pictures i took and questions and points i can raise. 3 pics per post though. 1. my engine bay 2. with...