manifold

Hi. I just got hold of a P-Reg C230K, and its quite different under the bonnet to the slightly later one I had in the past. Cable throttle rather than electric, totally different inlet manifold (throttle faces sideways rather than upwards), and so on. Is this correct? :confused: The...

Hi Car is in for the Port Inlet Shutoff Motor at present. I have had a call to say that two manifold stud's have sheared? Is this a risk of the work or could there have been carelessness. Not sure where to position myself on the cost as yet, but definitely do not want to be unreasonable.

I've started to do a big service on my 03 ML 270CDI, along with doing the usual oil change, air filter and fuel filter I'm also going to do the transmission oil change. I also decided to take a look at the EGR valve and pipes and a nosey inside the manifold. This is the state of the EGR...

Hi, does anyone have an exhaust manifold and downpipe for a 1982 230ce, or can recommend a breakers who have these older cars? Cheers Graham

The exhaust manifold on John's E220 is ticking, I've replaced the gasket once already and I've come to the conclusion it is warped. I want to get one skimmed flat. Anyone have a good uncracked exhaust manifold?

Hi there, I'm going to be giving the top end of my engine a bit of an overhaul soon (valve stem seals, re-grind the valves in etc.) on my 420SEL as the seals are shot. Is there any trick to removing the inlet manifold? Any hidden bolts that aren't immediately apparent? I've got a 5 litre...

Hi all I recently had to change the inlet manifold on my car. I did read on here about a repair kit but the garage tells me they could only get a full manifold. Can someone tell me if you can get a repair kit to to change the plastic socket joint on the old manifold? If its possible...

Hi all I have been told that my inlet manifold could be on the way out. The car has let me down again today so it looks like it's possibly the time to change the manifold. My usual garage tells me that the manifold could cost about £250+vat and fitting. Expecting that I might have a...

Hey! Everyone, As you may have already guessed I'm new here. Didn't knew there was MB club forums up untill now.. :p Anyways, I have recently been told by my mechanic that my Exhaust manifold has a small leak which could become quite a big problem in the future. I have been searching around...

Did I talk too soon about going back to the garage? I now have a problem with the inlet manifold. I have no power at all There is a little arm off the motor that controls the gates on the manifold. this has parted company and the garage are telling me it's a new manifold. Can this be...

Hi All I've been having power problems and smoking with my ML 270 cdi. The EGR valve has been removed and cleaned but upon removal I could see the inlet manifold was also full of black carbon crud (I am surprised it is running) I need advice on removal of the said inlet manifold. Can anyone...

Hi, 1st post here so please be gentle with me please... :o I´ve bought a brand new C270 intake manifold because of i have oil dripping from inlet ports. Does anyone have tried to do such a job here? , what do i have to remove to do such a job? Thanks, and sorry for my english

Has anybody got any spare manifolds for the m110 engine? Im looking for the setup in the photo below. Ive stupidly overtigtened the nuts on the right hand side where it bolts on the Y piece and cracked it. So if you have a set, or just the right hand side, please post the details. Thanks

Hello, Anyone as the torque value for the 16 bolts that hold the manifold into the head on the E300TD 1997? Thank you. Olivier

as the title suggests, i am looking for a 103 inlet manifold, anyone got one avalible?

Wanted, M113.960 (5.0) intake manifold, manifold required for ongoing project so not in a particular hurry. PM me if you have one available. Cheers

the centre connecting bar the one that operates the six butterfly valves in the inlet manifold has a worn plastic ball joint and it keeps poping off phoned mercs to purchase new bar because i did not think you could buy the small plastic ball joint yup you guessed it have to buy a new complete...

Hi I have just undone all engine bolts from manifold but cant work out how to remove it as its been held on by the pipe. anyone know how its fixed to this?

Hi I have for sale a (right hand drive) tubular manifold of a 190e 2.3-16Valve in good condition price - £190.00 "I can also post the manifold" manifold weighs approx 8.5kgs By null at 2010-05-12 By null at 2010-05-12 cheers mazza

Hi, First Question:- Is the Exhaust manifold on a W115 240D different to an Exhaust Manifold on a W123 240D? :confused: Second Question :- If they are different, does anyone know where I can get an Exhaust Manifold for a W123 240D ? :D Many thanks in advance.