pipe

hello everyone i have some smoke coming out the gap between the air filter box and the engine plus patches of oil under the car towards driver side i think it might be the seals on turbo pipes under the air filter box any idea how to get the air filter box off? and tools needed? some...

Hello, I am wondering if someone could please help me out! I have a 1991 H reg W124 230e fitted with Bosch KE Jetronic Injection. I removed the head to change the head gasket without taking photos/making notes of the vacuum connections. Not my brightest moment :o I now have a car that...

Hi all! Can anyone tell me what the following is???? The large black rubber pipe that goes to the inlet of the turbo has a 1" pipe that joins it approximately 6 inches back from the turbo inlet, followed upwards this 1" pipe then connects to a round-ish black plastic thing on top of the...

My car is a V-class V220 . year 2000. Can anyone tell me what my brake pipes are made of ? I want o buy a flaring tool from E-Bay Most tools show double or single flares at 45 degrees , is that what mine would be ? I need to replace the rear brake pipes which run from the back right through to...

hi everyone, ive had a 1998 c200 for a month or so now, so after upgrading lights and grill ive started on the engine. Having covered 68000 it seems to be very clean but the pipe work is looking tired. question is, how do i measure the internal diamiter of the pipes? (all rad pipes, fuel...

hi i've been replacing the spheres on my w124 estate. i've had to cut the smaller pipe from the drivers side sphere to get it off, so need a replacement. its the smaller 'exit' length of pipe that comes off the side of the sphere to the box unit closeby. epc shows A1243204853 as maybe the...

Iv been reading a bit about X pipe mods. Was considering looking into this, theres a company on ebay CKS that do this. Most of the info i have got is off american sites, about secondary cats & resonator (middle silencer) delete. My question is, does the X pipe get rid of the middle...

Hi All, Can someone advise the part number for the fuel pipe that connects from the fuel filter to the rear of the car? The current one seems to have perished - it leaks when its jubilee clips are tightened too much. If not, what fuel pipe can be used instead, and where would it be best to...

Hi all, as I am in progress of sorting out my poor fuel consumption problem, I am also working on something else in the engine. In the E280 CDI V6 engine, under the pollen filter, the screen wash liquid inlet pipe is visible. This pipe goes through the passenger side fender (body) into the...

Pipe bending, welding and general exhaust moding skills needed. If anyone could recommend someone or a firm that is not shy of a bit of a challenge and has the facilities to accommodate my needs......please inform me of who they might be. Im in Sussex so the closer the better. Many thanks.

Hi Posted on the engine forum below as a newbie with a E55 W210 Looking for advice on where to buy the x pipe secondary cat delete from other E55 W210 owners off the shelf to ship to Hong Kong Or anyone has photos that i can show a local exhaust dealer to make one here? Thanks - Jonathan...

Any pointers on how to remove the spring / flexible clamp between turbo and front pipe on a e300td? It looks like it wants compressing with some sort of compressor (g clamps may work?) but I don't want to brutalise it if it is fairly straightforward to do correctly or there is an easy work...

So, I need HELP and some information. In the process of assembling new brakes all round on my C43 and installing some SS braided pipes too. I managed to thrash and shred the bolt :wallbash: on the passenger side (right front brake for a LHD). I must say that the removal of the old pipes was...

Just heard Olly is out of stock :doh:

Help In the process of trying to figure out the MAF error I have, Ive been looking for air leaks and found this pipe loose near the MAF area (W203 / 2001) - is it meant to be loose? PS in the pics you can see the MAF is loose etc. just keen to know where the vacuum looking pipe should go or...

Hi, I have what seems to be a traditional problem for clk270's that the car starts up andtehn stops, and then you have to turn it over for about 20 to 30 seconds to get it to bite again. My guess on this was to do with fuel pipes and ahving a quick look at the fuel pump it seems to be fed by...

Whilst changing the thermostat on my w203 220cdi I have accidentally snapped a brittle "T" piece on a fuel pipe, & I'm hoping that someone can tell me what the pipe is & what it's called. The pipe has a white plastic slide clip to loosen & is fitted to the top of what I think is the fuel...

hi if a part of an exhaust is glowing red hot, then does that mean the cat before the glowing bit is blocked or does it mean the actual part glowing is blocked? thanks! derek

Hi all, I have a question about the material pipe that goes from the airbox to the grille... Mine split and ended up dangling down In front of the belt. I have rang up a parts dealer and they said it will be £26.10 + vat and he's not sure if it just the material pipe or if it comes with the...

Well today I replaced the thermostat and like nearly everyone else, managed to break the T piece that links the fuel pipe from the low pressure pump to the hight pressure pump with the pipe to the pressure release valve (at least that's what I think they are):doh:. So question number one...