i am hoping to change the standard stereo in my 2003 clk270,i am fitting a double din and i have ordered a fascia panel,can anyone tell me how to remove the panel above the ashtray that goes around the stereo please.
Guys
Has anyone tips on removing this, I need to dig out wires that were left over from the failed install of the video converter box.
:wallbash::wallbash::wallbash::wallbash:
Think its easy enough but want to know what I am letting myself into.
cheers
I spent an unsuccessful 30 minutes trying to get tar spots off the roof of my car with AutoGlyms Intensive Tar Remover after reading good reviews about it.
I'm not knocking the stuff but I think most tar spots are only a car for a few weeks if that before they are removed.
Now my car was...
Hiya all
Has or is it possible to vinyl wrap the aluminium door strips, or does anyone know how hard they are to remove, is it a simple DIY jobbie?
Will I need to get a set of trim removal tools
Cheers
Another Vito thread! - I've a 2003 108CDI
I have removed the exhaust camshaft, and now need to remove the intake camshaft. I've been working outside in the rain all morning and my brain needs a rest.
The intake camshaft seems to pass through a chain tensioner, and I can't see how to...
I am writing this DIY as I don’t find the instructions in WIS to be very informative. It describes how I replaced my own ABC pump after my local dealer wanted to charge over $8k for the job, due to an occasional red ABC Drive Carefully warning on my dashboard, and me needing to re-prime my pump...
I put my private plate on this X5 online and it went straight on and I received the V5 within two days which I thought was impressive.
What I'd like to know is has anyone recently removed a plate and how quick was the process? I've done it plenty in the past but that was when the DVLA local...
Hi,
I'm proposing to fit a Reversing Camera to my 2005 SL350 (R230) to plug into my replacement head unit (Alpine X800D-U).
I have seen one CCD camera that looks about the correct size to replace/substitute for one of the Number Plate Lights (Built-in Camera plus LED Light), but I cannot see how...
I have a 2001 SLK 320 Manual, I've had dreadful problems with water ingress on the passenger side. Its ruined the heater motor and the SRS module. How do I take out the heater motor and clear the drains ?
Well, basically just as the title says - and my apologies, if it's a silly question - is it safe to remove the cover from what I presume is an ECU, take it home, clean / paint / carbon wrap, etc?
The rest of the bay is looking reasonably good without much effort, but this cover ... well, see...
Anyone able to tell me how to remove the headlight on a W219. I want to change/upgrade the bulbs to LED's but after doing the Drivers side from the back without issue Im having no joy getting the side light bulb out on the passenger side, i simply wont pull out.
So a guide would be handy
Hi all
This isn't a "for sale" advert(!); I'd just like to check if there's anything I need to do before selling my Becker Map Pilot unit. Notes / actions so far:
>I didn't set a PIN when I originally got the car, so that won't be an issue for the new user I hope... (is it safer to plug it...
I have seen a very nice w123 but it has had chrome wheel arches fitted for over 20 years, car has been garaged so no fading on paintwork.
Question , how are these horrible things fitted and how do you remove them?
Hi, finally getting round to sorting out a few niggles, next on the list is the rear air vents in a w203 facelift (c55).
One side the fins had fallen inside and its not repairable the other side is a little cracked and not in great shape. I see on ebay you can buy the whole vent unit for...
Hi I have a 2006 C200 coupe 271.940 1.8lt, I can just see under the air box a split vacuum hose, and I need to repair it. I understand that there are a few vacuum hoses around and under this area.
Has anyone posted a step by step, hopefully with pics, on how to remove what's needed to get at...
I am having a lot of problems removing pad retaining pins from my front calipers had not originally ordered replacement pins so decided to order some before I finish the job
I spent over half an hour and only managed to remove one by hitting with punch on end with large hammer but could not...
Hi everyone,
I am hoping someone can point me in the right direction. The rear screen on my car has been replaced at some point and there are bits of broken glass in the rear seats (you can hear it when you swing the swing the seats down). It appears as though the glass must have got into the...
Hi,
I've got an A140 facelift model 2001. The gear knob has worn out and it needs replacing, can anyone to tell me how to remove the gear stick and gator please?
Thanks