timing

  1. S

    '04 C180 Kompressor - Timing Chain Failure?

    Hi, I have a 2004 C180 Kompressor Auto. A month ago the car begin idling very lumpy (it doesn't sound as bad in higher revs) and due to this, it's not driveable (I don't want to do anymore damage). When I bought it, it had the service light on and I only drove it for a few weeks before this...
  2. T

    W210 Diesel pump timing saga (ENDS)

    Hi all, I want to thank everyone who helped me try and get my E300 TD back on the road.:thumb: Unfortunately she beat me and I sold her last Saturday :fail I still have my E320 CDI and I WILL NOT be working on the pump on this car:ban: Thanks again everyone.
  3. V

    vito 111cdi timing marks

    Hi all, does any body have a diagram of the timing marks or the operartion to time my vito up, heads nearly ready to come of but want to get timing right before I do, bit short notice but its comeing of tmrw :doh: thanks in advance stu
  4. L

    Timing Chain

    The engine light has come on on my 2008 C180 Auto. There is 100,000 mile on the clock. The garage has told me that I need a new timing chain. I was under the impression that as it was a timing chain and not a belt it did not have to be changed. They are also saying that the 2 gears might be...
  5. T

    W210 Diesel pump timing saga (CONTINUES)

    I've had the diesel pump replaced. The first 20 seconds the car sounded like it was fixed, but then unfortunately the car goes back to running like a pig. It is now smoking beyond belief, won't idle, knocking and is slow to rev up. The timing and pump has been checked and rechecked. My...
  6. M

    W124 Ignition Timing & Emmissions

    1991 H reg 230e automatic. Can someone advise what's the best setting for the ignition timing with regard to obtaining optimum fuel economy? Also, what should the emissions be? Mine were 0.67% at the MOT a few weeks ago which I thought was a little bit lean. Finally, do these engines...
  7. T

    W210 Diesel pump timing saga (CONTINUES)

    Hi all(Druk), The timing is set at 14o! The pump is set 180o! The dots on the cam cogs are lined up! :fail The car is not knocking so much and idling better and has torque enough to move it's self in drive(without throttle), however what we have now is; No acceleration. Still not smooth. It is...
  8. T

    W210 Diesel pump timing saga (THOUGHT)

    With reference is my previous thread. Is it possible that the diesel pump timing could out by 180 degrees even though the engine timing is spot on and the pump was locked when fitted? :confused: All thoughts greatly appreciated. Shane.
  9. T

    W210 Diesel pump timing saga

    Hi all, The diesel pump saga continue's :mad: Thanks to everyone for their help. The timing is now is set perfectly, unfortunately the car is still running like a pig :fail The symptoms are; idles on 6 cylinders, lazy and sluggish throttle response, no power and a bit of top end knocking. My...
  10. T

    Diesel pump removal timing settings

    I'm replacing the diesel pump on my 1997 E300 Turbo diesel. My mechanic set the timing to 14 degrees TDC and locked pump and fitted it. Unfortunately it is running like a pig. It's on 6 cylinders, but it's slow to rev and when drive selected it would hardly move the car. My mechanic spoke to an...
  11. T

    Timing degree to remove pump W210

    Hi all, I'm having major problems changing my diesel pump. The mechanic doing the work is trying to confirm what degree the timing should be before fitting the locking bolt. He is fairly sure it is 17 degrees. The other problem is the pump won't lock, there seems to be a break on the lower shaft...
  12. J

    Timing question

    I am planning on buying a timing light/gun to check the timing on the car as it runs a little rough. Now, the timing lights for sale like this one... DRAPER 52616 XENON STROBE IGNITION TIMING LIGHT | eBay ...doesn't appear to have a way to set the strobe light like show in this video (at...
  13. I

    M102 Twin Timing Chain from what year?

    Hi, I've dug around, but no success with this one. Would anyone know what 2ltr (ish) M102 got the Twin Chain, was it the 962? Thanks in advance. Cheers, Paul
  14. L

    M271 Timing chain alignment tool

    As I intend to renew the timing chain om my C180 I have been trying to source the clamp that holds the chain against the sprockets whilst the old chain is being replaced by the new. I can get them from the USA but seem to be drawing a blank anywhere closer. :dk: I thought I had cracked it when I...
  15. L

    M271 timing chain dimensions

    Apologies if this has been answered before but I could not find the correct search term to get an answer. My 203 has now done 98,000 miles so I intend to check the timing chain for signs of stretching. Does anyone have the dimensions of a new chain so I can compare it to mine and also the...
  16. M

    How to change timing chain???

    Hello my name is Thomas from Sweden, and I need to change the timing chain on my Mercedes Benz E430 W210 Y:1998 Do I really need to tear down the engine, or is there a link on the new chain to the old one and then turn around everything until the new one is fully on? Have asked around at...
  17. RossMateee

    Timing Chain or belt

    Hello I have a Mercedes c180(w202) a 1.8 automatic and not sure wether it is a chain or a belt, it is too much hassel to take everything apart to tell so not sure?
  18. C

    When to change timing chain on A210

    Hey guys, my car is in the garage at the mo getting work done for the RWC which it failed on front top mounts, NSR shock, and rear pads. While it's there, should I get the drive belts done too, mileage is 77,139. Got no history. Also, what about the timing belt/chain? When is that to be done?
  19. C

    Timing Chain Tensioner

    hi, Does anyone know where the Timing Chain Tensioner is on the OM642 V6 2010 Sprinter Van many thanks Philip
  20. 3

    leaking timing cover

    i have a 1993 300ce leaking at the corner of the timing cover, bottom were the seal touches the cylinder head. i have changed the seal 3 times and can not get it to stop leaking. i cleaned it very well the groove with brake fluid cleaner used silicone gasket maker to seal it,i put sealant in...
Back
Top Bottom