• The Forums are now open to new registrations, adverts are also being de-tuned.

Removing a wiper blade W202

KillerHERTZ

Administrator
Staff member
Joined
May 21, 2003
Messages
19,457
Location
Cambs
Car
SL63 AMG
Ahem, im ashamed that Im asking this as I have done it in the past.

I have just purchased a flat Bosch style wiper blade and I cannot remove the old one. its hinged on a rivet but I cannot find any clip to pull a latch?

Help!
 
Last edited:
Ahem, im ashamed that Im asking this as I have done it in the past.

I have just purchased a flat Bosch style wiper blade and I cannot remove the old one. its hinged on a rivet but I cannot find any clip to pull a latch?

Help!


There is a plastic clip at the end of the wiper arm on the blade itself.
You should be able to push it down, towards the windscreen and than push the blade into the direction of the turning point of the whole assembly.

Attila
 
Wiperblade removal W202

Just as Twice Describes, and for the benefit of others Pic below.
 

Attachments

  • Wiperblade removal  W202.jpg
    Wiperblade removal W202.jpg
    98 KB · Views: 298
Im not stupid after all! - The large clip part had broken off & the only way I could remove the wiper was by prising it off with a small screwdriver.

Thats why I couldnt make sense of it.
 
Im thinking of getting these new style Bosch AeroTwin flat wiper blades aswell could you post a picture of how they look on your W202 and have you used them yet are they realy as good as there claimed to be ?
 
Was going to post some pictures on Sat anyway - seem to be great so far!
 
Hey man where did you buy your wiper from? and is the spoiler on the aero twin around the right way for the right hand drive?
 
Im thinking of getting these new style Bosch AeroTwin flat wiper blades aswell could you post a picture of how they look on your W202 and have you used them yet are they realy as good as there claimed to be ?

Have fitted the Aero wiper blade a few days ago. Very impressed seems to stick to the screen much better than the old one. Very pleased. :)
 
Does it stick to the screen along the complete length, or does it not make complete contact near the end? I think KLP92 said it didn't make complete contact on his thats why I ask
 
The end (about 1inch) doesnt make contact, still 10times better than the old one.
 
im shure in time it may bend into shape so it does make contact, dont you think ?
 
Here is a shot of the front, gives you an idea of the area that doesnt touch the screen (note: Shadow). doesnt effect it overall & I still prefer it to the standard type.

And, no the water on the screen isnt after I had used the wiper!
 
Last edited:

Users who are viewing this thread

Back
Top Bottom