dyno

E63 AMG Bi-Turbo we had in last week @ MSL Performance -------------------------- Tuned to: 746.9 Bhp 855.5 Ft Lbs Torque -------------------------- Equipped with: MSL Tune AMS Induction Kit Weistec Turbo Back Pipe tleBIhnEvBQ

C63 Black Series AMG in for a remap on the weekend. 2nd Decat Res Delete MSL Tuned 570 Bhp 515 Ft Lbs Torque krIOlkNSFRk

An E320 we had in on the weekend for a Remap & DYNO @ MSL Performance!! Stock: 239.58 Bhp 458.00 Ft Lbs Torque Tuned: 286.38 Bhp 513.72 Ft Lbs Torque Some impressive gains made here

E63 AMG Estate in with us for a Remap & Dyno @ MSL Performance. Stock: 490.62 Bhp 458.64 Ft Lbs Torque Tuned: 527.76 Bhp 488.05 Ft Lbs Torque

A C350 Estate we had in with us @ MSL Performance on Monday. Came in for a Remap & Dyno. Stock: 263.84 Bhp 443.64 Ft Lbs Torque Tuned: 306.23 Bhp 510.8 Ft Lbs Torque

Preferably with only a remap, no other mods ;)

Hi all, I have a w211 e270 cdi 2003. I had follow the below steps to enter the dyno mode but it cant successful. 1. MAKE SURE TEMP GAUGE IS SHOWING ON CLUSTER, IF NOT SELECT THE BUTTON ON THE LEFT OF THE STEERING WHEEL TO SCROLL TO THE TEMP GAUGE. 2. PUT YOUR KEY IN THE IGNITION, TURN IT...

Firstly just want to say a massive thank you to Acid, Sarim and Co for sorting out the issues on my car that we had at Vmax. Good news, the cars been back on the dyno and it appears the issue could be down to tyre pressures and potentially the race fuel. Even better news the car ran 768.8bhp...

Dyno Day Date : 9/08/2015 Dyno Runs £50 Per Car M156 Remap £600 M157 Remaps £750 M113 84mm Pulley and Maps £700 Diesel Remap OBD £250 Diesel Remaps BDM £300 A45 ECU Remaps £650 If anyone else needs anything extra please contact me on 07765 44 44 47 Acid

Hi guys, Has anyone ever been told that you can't get an accurate dunno on a merc because of the auto box? Smells a bit fishy to me I’m sorry, but the auto gearbox on the Mercedes do not allow us to get an accurate dyno reading.

I'm planning on turning up around 3.30pm, hope to get my E63 run up. It's now covered 1100 miles and needs a good seeing to. :bannana:

Hi Guys, Did some searching and not 100% sure so thought I would ask. MSL did a great job but was a late pick up due to trains, another story! Didnt ask for a Dyno run but a sheet left in the car seems they have, good guys or what! Had my car mapped and secondary cats removed and guessing dyno...

Guys, What's "off w/term.15" mean? Thx Steve

Right Guys Looking at some time in July thoughts Please ???????????????????????????

Hi all, I have a w211 e270 cdi 2003. I had follow the below steps to enter the dyno mode but it cant successful. 1. MAKE SURE TEMP GAUGE IS SHOWING ON CLUSTER, IF NOT SELECT THE BUTTON ON THE LEFT OF THE STEERING WHEEL TO SCROLL TO THE TEMP GAUGE. 2. PUT YOUR KEY IN THE IGNITION, TURN IT...

Does anybody know or can recommend where I could go to get a dyno done in or around Newcastle upon tyne ? I had a remap done and I am very happy with the result but no dyno was done .I feel that a dyno should be done to get the best results.any suggestions please?

Does anybody know or can recommend where I could go to get a dyno done in or around Newcastle upon tyne ? I had a remap done and I am very happy with the result but no dyno was done .I feel that a dyno should be done to get the best results.any suggestions please?

https://www.youtube.com/watch?v=X0Na2mL-LmU Hi Guys, So a big Thanks to Acid, John, and all the guys that worked on the car at Msl recently. Some of you may know that along with Jules (Cyclone1) i was also having the Upd 77mm Sc Pulley fitted. There were a fews bits and pieces that needed...

My C63 is running a eurocharged remap. Should be around 520+ bhp. Car feels fast but not sure if it's 500+ bhp fast. Think there's a possibility the map could have been wiped by MB. Want to take the car to have a dyno run to measure power but not aware of any good dyno operators in or around...

Hi All, As some of you may be aware there is a new 77mm Supercharger pulley (twin bearing) available from MSL and manufactured via UPD. It offers the ability to match the power / torque figures of the tried and tested 180mm crank pulley and as such, potentially offers owners a new pulley to...