• The Forums are now open to new registrations, adverts are also being de-tuned.

injector

  1. T

    Blowing injector

    Hi Guys My W203's injector on cylinder number 3 is blowing. I fitted a new new high pressure pump a month ago. Any ideas why and any advice.
  2. K

    Injector is blowing

    I changed injector seal on injector closest front of engine, blowing solved for about a week, blowing again but not as bad so removed injector to find it covered in Black Death again, removed other injectors but they are spotless, what is wrong? And what should I do please help :dk:
  3. C

    Injector failure? S212 E220CDI 59 Plate

    What a weekend! Mercedes and Shogun both break down on me! :dk: Driving home from work 8.30 Friday night about 15miles from home, engine management light comes on and loss of power. Pull over check book, okay to drive. Manage to limp home. Saturday, out and about in Shogun, come back to it...
  4. BlackC55

    FOR HIRE: CDI injector seat cutter £25

    I have for hire a top quality diesel injector set cutter. An essential tool whan CDI injectors are replaced especially if you have the dredded black death. To hire it for one week it is £25 inclusive of postage to mainland uk. email me on [email protected]
  5. B

    W204 m271 c200k which injector cleaner??

    M271 pretty rough on cold start and clickin noise for about 20secs. But when warm flawless. What fuel injector cleaner would you recommend? It's a 2009 c200k Thanks
  6. G

    C270CDi injector seating

    I noticed a slight chuffing yesterday coming from under the bonnet. A closer look with the engine cover off this afternoon revealed No1 injector was letting combustion gas come by. Has been for a while judging by the carbon gunk around it! So I pulled the injector and withdrew the copper...
  7. m2287

    BMW injector coding

    As some of you may know, I have a 2002 e46 bmw 320d which blew up after 2 days of ownership due to a swirl lflap falling off the intake manifold... I have replaced the engine but now it wont start, it only turns over. Apparently I need to get the injectors from the replacement engine coded to...
  8. J

    W203 220 CDI oil in injector bore

    Hi all. Ive been having a problem with my car lately. its been very lumpy at idle. 6 months ago all injectors where cleaned and car was running fine. the lumpiness has returned. Ive cleaned EGR and changed fuel filter and put new copper seals in the injectors. i also had to clean up some oil...
  9. Z

    190e W201 New Injector Problem

    Hi, I have replaced the fuel injectors on my 190e 1.8. Fitting went fine.... When I attempt to start the car now the engine fires runs for about 1 second then dies, does this everytime, tried it about 12 times-same. Is it possible that I have the wrong injectors for my car? Eurocar...
  10. K

    (52 plate cdi 220 saloon) injector return pipe

    Need one asap thanks
  11. D

    C250 W202 Leak from injector line at pump

    I seem to have a leaking injector line at the pump end, injector line closest to the front of the car. Have these got an o-ring as such, or are they just flared? I've been trying to find the cause of the air being drawn in and draw up a list of parts I'll need to do the job in one go, and...
  12. B

    W210 E300 TD injector problem?

    Apologies if this has been covered a thousand times before! Maybe someone could point me in the right direction? My 98' E300 TD has developed quite a tapping noise from idle up to about 1500 rpm. To my untrained ear it sounded like the tappets were noisy, so changed the oil and filter and gave...
  13. 219

    C270CDI injector seals

    Now beginning to wonder if I have bought a dud car , another problem rears its head . I started to notice exhaust fumes in the cabin ; with no obvious sound of any leaks in the exhaust . The car sounded fine when standing next to it at idle , although there was a slight 'tick' under...
  14. M

    Injector Seal Replacement - Hole in water jacket help!

    So my old man has a W210 E220CDI as a runabout, I noticed an injector seal was leaking at the weekend. Took the covers off and it wasn't too bad, anyway thought I'd change all 4 of them for him as we're quiet at the min so instead of asking my mechanic to do it I thought I'd do it myself...
  15. NISFAN

    Injector re-call OM651

    Just a heads up, my C220CDI has been re-called for a complete new injector re-call. Not sure which models it affects, but mine is a 2010 BE 220CDI with OM651 engine. Anyone else been informed of this? Problems?
  16. W

    C220 Black Death, Injector Replaced - Engine Still juddering when idling

    After a trip around Europe in my 2003 C220 CDI, injector 1 was covered in black death and juddering when idling. I put on the computer and injector 1 was faulty, so i replaced injector 1 with a recon injector with new seal, bolt and clamp. Started up and took on a drive this morning, the...
  17. B

    w210 e320 cdi injector removal trouble

    Hi, I started a thread a month or so ago. Im having fueling problem with said car. http://www.mbclub.co.uk/forums/engine/136662-e320-cdi-fueling-problem.html Drove it to a mate to remove the injectors, so i could get them tested and replace the seals. My engine was hot by the time i got to...
  18. T

    Black Smoke Please Help

    I have Black Smoke coming out of the exhaust on my 2001 w201 E320 Estate. 1. I had my ERG valve cleaned and the star diagnosing show it’s within the % limits. 2. I had an injector (star +5.2) reconditioned and fitted. Star shows it at ok 3. I have replaced the air...
  19. W

    ml 270 cdi injector bolt

    hi i recently bought a 2001 ml 270 and injector number 3 had the so called black death i took it out and changed the copper washer but the thread has gone for the injector bolt has anyone any cures for it. i've read a lot of threads about people putting holes in the head buy over tapping them...
  20. P

    injector leak of test

    Hi lads i have my e320cdi going in for a injector leak of test on wednesday and was hoping some one on here could tell me how much or there about wat it should be,and how long it would take, and how much would a injector would be :)
Back
Top Bottom