mrcbenz
Active Member
Hi, I recently bought a 52 plate E Class 270CDI Avantgarde saloon. Yet to use it as I'm in the process of selling my old car. After reading all the recall information on this site and else where on the web, I decided to contact MB(UK) for any information regarding the recall work done on my vehicle. Just wanted to say they were very helpful and prompt with providing the information. So, anyone looking to buy a pre-facelift W211 E Class can obtain information regarding the vehicle from MB. Sorry if most of you know this already and the new generation of E Class is upon us, but I've found this forum very useful and informative from people 'in-the-know' without the sales pitch from dealers and wanted to share my experience.
Here's what they found for my vehicle. There is no mention of the Valeo radiator beinng replaced though, but I'll be checking this myself. As my car is now at 88000 miles and seems a while ago these checks were carried out, I'll be having them looked at before putting the car on the road. Can some of you good people explain exactly what was done here please? Some are obvious to me but not all.
Date Description Mileage
2005 Mount ground line & braket on SBC 37104
2005 Program battery control unit 37104
2005 Check CDi injectors & quanitity control valve & replace if necessary 33501
2005 Check CDI low pressure fuel hoses & replace if necessary 33501
2005 Check exhaust gas turbocharger 33501
2005 Track expanded short test, Check parameter settings of control unit 33501
2005 Check water drain grommets 33501
2005 Check audio gateway & flash if necessary 33501
Many thanks,
Rob
Here's what they found for my vehicle. There is no mention of the Valeo radiator beinng replaced though, but I'll be checking this myself. As my car is now at 88000 miles and seems a while ago these checks were carried out, I'll be having them looked at before putting the car on the road. Can some of you good people explain exactly what was done here please? Some are obvious to me but not all.
Date Description Mileage
2005 Mount ground line & braket on SBC 37104
2005 Program battery control unit 37104
2005 Check CDi injectors & quanitity control valve & replace if necessary 33501
2005 Check CDI low pressure fuel hoses & replace if necessary 33501
2005 Check exhaust gas turbocharger 33501
2005 Track expanded short test, Check parameter settings of control unit 33501
2005 Check water drain grommets 33501
2005 Check audio gateway & flash if necessary 33501
Many thanks,
Rob
Last edited: