seal

The rubber window seals on the outside of the driver's and front passenger's doors are badly cracked. (These are the seals that the window slides against.) Car is a W123 280E saloon. Have any of you replaced these recently? Which supplier can you recommend, and what's the going price for...

Those in the UK will have noticed it has been a bit wet recently ... A couple of days back, after being parked for several days of non-stop rain, the carpet was VERY wet (water dripping off of it when removed to dry it out). I've not noticed any damp in there before but after a good drying out...

So my old man has a W210 E220CDI as a runabout, I noticed an injector seal was leaking at the weekend. Took the covers off and it wasn't too bad, anyway thought I'd change all 4 of them for him as we're quiet at the min so instead of asking my mechanic to do it I thought I'd do it myself...

Hi all Only noticed this weekend (heavy rain overnight) that there was water coming in above the rear view mirror. W211 270CDI, 53 plate. Not had this before, but only had car for 6 months and through summer. There was enough water to drip from the overhead light controls onto the rear...

Hi All, Is it worth putting the above type of product into the E320cdi w211, to help and try to prevent the Valeo rad issue? Iceboy

hi all i'am going to change the oil-pressure port seal on my e240 (1999) engine and was just wondering about the correct orientation of the seal against the engine-block is it as shown in Pic A or in Pic B ? thanks in advance brendan

id like some advice would buying gearbox oil,filter and seal from ECP just as good as buying from main MB dealer..apart from price.:dk:

I normally tend to keep an eye on my engine and over the last few weeks have noticed a general build up of dirt around the turbo and one morning there was a minor 'incident' where the car juddered for a moment under acceleration. I've finally got around to cleaning up the engine this...

My intake seal on the turbo has blown and wrote off my intake shut-off motor. I'm considering a preventative modification as it's a re-occurring and common problem. :wallbash: MB have revised this seal three times. The same happened on my mini cooper S in November where oil from the PCV...

Hi would anybody know the part number for the small upper door seal that fits under the chrome finisher plate at waist level on the b pillar? My dealer cant find the seals? Thanks

Hello. Would be greatful for any help / reference text on this procedure. Can anyone suggest a decent maintainence manual as heard that the Haynes item is not that good Wierd oil leak; 1 minute it streams out, the next minute its dry as a bone; so much so that I took it into Thwaites (phil) in...

So, Another week, another injector seal and glow plug gone.....Also looks like my manifold is leaking. Best get the cheque book out. Anyone know how much to remove and clean/reseal an ML270 CDI inlet manifold? Loathed to buy a new one, but may have to!

Just discovered i have a injector seal leak which has made a right mess. Have spoke to local indie and he has advised i can keep the labour charges down if i clean the engine myself before he does the work. Does anyone have any tips on what to use to clean round the injectors and how to do it.

Hi All, The rubber along my driver window is nackard, no longer holding its shape onto the window. Could someone point me to instructions on how to replace this please? I couldn't find any workshop instructions on WIS. Cheers. Screen shots attached...

Has anyone else found this issue - my car went into limp mode, merc said they thought it was so serious it would need a £2000 repair, got the BAS/ASR unit for £40 fitted and its fixed, but noticed the water has come in via the grills on the bonnets, I have no idea where is best place to get a...

I have a W202 1998 C240 that has failed the MOT because of the Power steering Pump leaking from a failed seal. How easy is this to repair or is it a case of replacing the pump for a new one? It sound like a repairable job being just the seal but with no knowledge on this I would appreciate...

Hope someone can point me to a good "how to" or images. I have some corrosion around the sunroof which needs treating and I am certain the whole cassette will need dropping. If its out the seal might as well be replaced and I wondered if there is a good description of the steps. I can well...

Hi all Not sure if anyone can help I had a leak from one of the pressure valves on my fuel injector pump after spending a couple of days locating the tool to take it of changed the the rubber and copper seals on all five valves ever since then the car has been running badly and heavy black...

Britemax DAS-6 Polish, Seal & Wax Kit Further 10% off if you quote XXXX at checkout - expires 21.12.11

Hi last year in November I bought a V Class 220 Ambiente the car as going fine but inside cabin was a terrible small of fumes. So I found out about the so called " black death" and I went to change the Injectors seals. This forum was good help just reading all the different topics about black...