removing

I had a look at the brakes on my CLS 500 yesterday and decided that I will leave the pads a bit longer as they had 8 mm one side and 10mm the other, part of the reason is that the pins didnt seem too keen on coming out, if there a knack to getting them out, didnt want to muller them so just...

Hey guys, still at abit of a stuggle trying to get this old cover off....! Think all ive got left to do now is take out the sump bolts and also im stuck with 2 bolts at the top underneath the 2 cam sprockets. Ive taken 1 off to move it so i can get to the bolt but not theres a guide rail in the...

Anyone have any remedies for removing this annoyance? Why someone has been leafleting on car windscreens in this weather is beyond me, do they not have sense!

I'm swapping over the cushions on my driver seat to another working frame, mine no longer adjusts forward to make the backrest more vertical. Does anyone know how to get the 2 black plastic things the steel headrest prongs sink into off the top of the seat backrest in a 202? I believe it's...

I started cleaning the interior of my SM (nice blowy day to dry it). The nearside rear carpet has grease marks from the fateful day when the disc brakes exploded taking out the drive shaft and gearbox and I (distractedly) put the remains in the back. After cleaning with Autoglym interior...

I have a 2010 C200 Blue efficiency Executive SE and have no idea how to remove the old Windscreen wiper blades to install new ones. Can someone help me out?

Im new here. Nice forum! I got a question about my 2002 S210 320cdi OM613 As the title says, I want to remove/deactivate my EGR valve. But I can't find parts or any "emulator" to do this, like you find everywhere for the bmw's. Have anyone done this? Any help would be fine. Thanks :)

I am now in receipt of my 2011 Mercedes C180. Everything about the car is brilliant. With just one snag. There is a dead spider behind the speedo glass, along with a web that the said spider must have created before its demise. Does anyone know the process for removing the speedo glass, I...

I'm getting very fine scratches appearing on all windows of my 3 year old E class. Merc spec glass seems to suffer more from this than other manufacturers.What's the best proven methods to remove them that people have found?

does anyone know what the best way to removing the glue is from old badges?

My '03 E320 had bad corrosion on the top half of the headlight lenses. After looking at several remedies on You Tube, I decided to have a go. First used 600 W & D using plenty of water, then next 1200 w/d, using lots of elbow grease. I was a bit worried that the lenses were now completely...

My wonderful neighbour has been having a loft conversion done this week, which has involved a section of fibre glass flat roof. This morning I noticed my w124 is liberally coated with spots with what i assume is the resin used with the fibre glass matting. Front and rear screens, bonnet and...

I dropped some of the gunk from the tyrefit canister on to the seat. Its black suede on an Artico seat. The tyrefit that leaked out is like glue. Anyone suggest a product to clean it with?

Hi all, I'm planning to remove the Audio 20 / UMI unit from my car and replacing it with a double din head unit. I was planning on removing the screen and converting the top section into a storage space. Would the best option be to fibreglass the hole that is left behind after removing the...

I have some spongy double sided strips holding on the reg number on the rear of my car, going to put my own private reg on which will be shorter than the orig but there will be some strips showing either side.. How do I go about removing these along wit the sticky residue they will leave...

I have identified a rattle coming from the vibration of the boot part of the roof lining on my W204 C class estate. I think I could solve it by jamming a sponge roughly under where the rear proximity detector lights are. The problem is I can't find a large enough access point to get to that...

Hi All, My 2006 ML W164 has a leaky injector, I lifted off the engine cover and with it running it puffs from that injector and I can smell the gases, there is also alot of gunk around said injector... Not really a major isssue just change the seal but I am off on Holiday Saturday with a...

I removed a cracked "Load protector" panel from my CLK and it's left all the double-sided foam tape crud behind.. What's the best way to remove it? (Probably not a razor as the bumper cover is plastic?) (Not sure if the link will work, but let's try it!)...

hi guys can anyone help please,ive got a 99 w208 clk and just filled the tank,on monday im doing a trade in with a dealer so it would be nice to take some of the fuel out of the clk,ive tried syphoning but obviously it has something in the filler neck to stop me,so how can i remove petrol please.

Hi All, I had a look at removing the rear calipers on my SEC at the weekend. The two 19mm bolts will not move at all. Primarily because there does not seem to be enough room to get a breaker bar on them. The spring, parts of the SLS system are all in the way, and I just cannot get any...