Do these wheels/tyres fit?? Read this first! Offset/fitment answers within..

[altreed]

I have a lowered W202 c36, I am interested in getting AMG style 3 (old school) and checking your (Murry Systems) PDF file, I should be able to get a set of wheels off a s class with offset 25, if the wheels are wide enough. I am a little suprised at that. I have seen them available on ebay, but thought I needed 37/30 offsets f/r

If anyone can confirm that s class ET25 wheels have been successfully fitted on a w202 I would be grateful.

Thanks
Dave

 

[Chris Murray]

The AMG I 2pc wheels as shown here are the 18x8.5ET25/18x10ET25
http://www.alloywheelsdirect.net/me...ass_estate_s202_alloys/18_amg_i_2pc_wheel_191
They were made to fit a variety of models including the 202 and 208. Likely to look very aggressive on a 202, and you won't get much rim protection from the recommended 225/255 tyre sizes.

 

[wittymoniker]

hi, will a set of 20' Kahns go on my R230, not sure about width so what's the maximum it'll take???


cheers

 

[Sp!ke]

I'm a bit confused by the table and can only conclude that these might just fit my W124CE with a bit of luck but I'd like a definitive answer.

8 1/4 J x 17 H2 ET34, the tyres are 235/45 ZR17
Anyone know the definative answer?

 

[Norman]

Hi

Merc s320 R-reg, can anyone tell me the offset and pcd of wheels I need to be looking for - it's for my girlfriends Dad who is a techophobe so does not do the Internet

thanks

 

[Chris Murray]

hi, will a set of 20' Kahns go on my R230, not sure about width so what's the maximum it'll take???


cheers

Kahn offer the following for the R230:
RSC 20x8.5ET31 front
RSC 20x10ET28 rear
RSV 20x9ET22 front
RSV 20x11ET35 rear
RSX 20x9ET22 front
RSX 20x11ET35 rear

 

[Chris Murray]

I'm a bit confused by the table and can only conclude that these might just fit my W124CE with a bit of luck but I'd like a definitive answer.

8 1/4 J x 17 H2 ET34, the tyres are 235/45 ZR17
Anyone know the definative answer?

They fit the 500E in those dimensions. Other models likley to require some work on the arches

 

[Chris Murray]

Hi

Merc s320 R-reg, can anyone tell me the offset and pcd of wheels I need to be looking for - it's for my girlfriends Dad who is a techophobe so does not do the Internet

thanks

Identify your car here: http://www.alloywheelsdirect.net/information/car_model_catalogue/mercedes

Then look here:
http://www.alloywheelsdirect.net/information/fitting_chart/mercedes-benz

 

[DSLiverpool]

Chris

What is needed to make

8.5 x 18 et 44
9.5 x 18 et 46

AMG monos compatible with R129 please

Some sort of spacer or special bolts ?

TIA

 

[Chris Murray]

Chris

What is needed to make

8.5 x 18 et 44
9.5 x 18 et 46

AMG monos compatible with R129 please

Some sort of spacer or special bolts ?

TIA

Both!

 

[DSLiverpool]

Both!

Have you got both of them pls Chris (before I bid for them) I may just get the new ones you have on site but I`m interested in what these go for (on ebay low start no reserve)

Dave

 

[Chris Murray]

Hi Dave
The whole pack in is stock and would be as follows:
16x RAD4182 M12x1.5x55R14 bolts £32
1x RAD2183 M12x1.5x55R14 Locks (set of 4) £30
2x SCC12.061 13mm adapter £110
DHL delivery £7
Total £179

 

[DSLiverpool]

2 Adapters not 4 ? (excuse my ignorance)

 

[Chris Murray]

2 Adapters not 4 ? (excuse my ignorance)

2 pairs.

 

[tonydoug]

will this work?

I have a 94 e320 w124 sportline convertible with 205/60R15 tyres
I would like to put on some 8 hole alloys off a 1997 P Reg SL500 with 225/55R16 tyres. Will they fit ok - is the offset ok bearing in mind the lowered suspension on the sportline?
Look forward to your response
Tony

 

[Quincy_W140]

255/45R18 all round or with optional 285/40R18 rear
or if they're a lot cheaper:
245/45R18 all round or with optional 275/40R18 rear

Well I finally got the tyres fitted to the rims today (I've only had them 14 months , what a lazy sod) - 245/45/18's on the front and 275/40/18's for the rear...and ordered the bolts from alloywheelsdirect today too.

I'm looking forward to the weekend when I can roll on 18's at last

Q.

 

[bateman]

17" Alshain Alloys

Hi there - I'm new to thjis and could really do with soem help before I part with some cash to buy some alloy wheels. (I have checked teh chart from the previous posting but can't make head nor tail of it).

Put simply, I have a 2002 (W202 I believe) C22 Cdi Classic. It has the small 15" wheels and I would like to upgrade them.

Can someone tell me if these will fit :
17" Alshain Alloys
2 x Fronts 7.5J 225/45/17
2 x Rears 8.5J 245/40/17

Many, many thanks in advance.

 

[Chris Murray]

They will fit straight on - if your old 15" wheels are steel wheels then you'll need new bolts though.

 

[pen-ultimate]

I've been offered a set of 235/55/17 from an S class for my W215 which has 225/55/17 on it.

I've had a look at the list, but I can't find this size combination; there are wider ones, taller ones, slimmer ones... but none are 235. Will they fit?

TIA,
Nick

 

[Chris Murray]

Hi Nick
They will be fine. Consider replacing them with 225/55R17 when the tyres need replacing. They'll also be cheaper.
Chris